CushionMaster Neutral Base (Flexible Color Coating)
A unique acrylic color formulation engineered to match the flexibility in the cushion layers of the CushionMaster™ Systems. These color coatings maintain their flexibility over time. CushionMaster™ Neutral Base is designed to be mixed with ColorPlus™ Pigment Dispersion to achieve desired color.
5 Gallon Pail, 30 Gallon Keg, 55 gallon Drum
Yield calculations are based on undiluted gallons of CushionMaster Color Concentrate and vary according to surface texture and porosity within the limits below:
.05 to .08 Gallons per square yard per coat.
CushionMaster Neutral Concentrate is a 100% acrylic emulsion coating designed as a color coating for SportMaster Cushion Systems. The elastomeric properties of CushionMaster Color Concentrate provide resiliency and flexibility when applied to layers of CushionMaster I and II.
- Tennis Courts
- Basketball Courts
- Pickleball Courts
Surface must be cleaned entirely of dust, dirt , and debris. CushionMaster layers must be completely dry before applying CushionMaster Color Concentrate.
Mix materials to a smooth, uniform consistency.
- CushionMaster Neutral Concentrate – 55 gals.
- SportMaster ColorPlus – 4 gals.
- Silica Sand (80 – 100 mesh AFS) – 400 lbs.
- Water – 28-33 gals.
The following mix design is for a 30 gallon keg of CushionMaster Neutral Concentrate:
- CushionMaster Conc – 30 gals.
- SportMaster ColorPlus – 2 gals.
- Water – 15-18 gals.
- Silica Sand (80 – 100 mesh AFS – 200 lbs.
Note:Mix thoroughly to ensure complete dispersion of ColorPlus.
Apply with a soft rubber squeegee. A minimum of two coats are recommended. Three coats are recommended for the ProCushion System.
Stir material thoroughly before using. Temperature must be a minimum of 50° F. and rising before application. Do not apply when raining is imminent or forecast. Keep from freezing. Close container when not in use.
CushionMaster Color Concentrate dries in 30 to 60 minutes under optimum drying conditions. Low ambient or low surface temperature and high humidity increase drying time.
Wash tools in water before material dries.