Color Concentrate with sand | Textured Court Surfaces

Color Concentrate With Sand

Textured Court Surfaces

Color Concentrate With Sand is a 100% acrylic emulsion coating designed for tennis courts and other sport and recreational pavement surfaces.

Sizes Available
5 Gallon Pail, 30 Gallon Keg, 55 gallon Drum

Coverage
Yield calculations are based on undiluted gallons of SportMaster Concentrate With Sand and vary according to surface texture and porosity within the limits below:

Each coat requires .06 to .08 gallons per square yard.

Colors Available

Forest Green
Light Green
Dark Green
Beige
Brown
Red
Maroon
Gray
Blue
* Colors may very slightly from actual product.
Color Coating

100% acrylic emulsion coating designed for tennis courts and other sport and recreational pavement.

Description

Color Concentrate With Sand is factory mixed with a specific blend of silica sand to provide a safe, textured surface.  This specific aggregate mix also sets the speed of play on tennis courts. Our factory textured tennis court coatings are available, by request, in all 5 ITF (International Tennis Federation) paces: Slow, Medium-Slow, Medium, Medium-Fast, Fast – Note: ITF classified paces need to be quoted per project, as the coverage rates and number of coats may change, depending on the chosen surface speed.

Uses

  • Tennis Courts
  • Multi Purpose/Basketball
  • Pickleball Courts
  • Athletic & Recreational Areas
  • Playgrounds & Game Courts
  • Sports Courts

Surface Preparation

Pavement surface must be cleaned entirely of dust, dirt, debris and all loose materials. Repair of pavement surface defects, depressions and cracks must be completed prior to application. All repairs must be flush and smooth to adjoining surfaces.

New asphalt surfaces must cure 14 to 28 days prior to application. It is recommended that any uncoated asphalt surface receive one or more coats of Acrylic Resurfacer (Technical Bulletin CMT- 3) as required by surface roughness and porosity to provide a smooth, dense underlayment for application of color texture and finish coats.

New concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. They must never be steel trowelled. Etch surface with Muriatic or Phosphoric Acid and apply SportMaster Acrylic SportMaster Adhesion Promoter prior to color coating.

Mixing Procedures

The following mix design is for a 55 gallon drum of Color Concentrate with Sand:

  • SportMaster Color Concentrate with Sand – 55 Gallons
  • Water – 20-25 Gallons

The following mix design is for a 30 gallon keg of Color Concentrate with Sand:

  • SportMaster Color Concentrate
  • with Sand – 30 Gallons
  • Water – 12-13 Gallons

Note:Mix material to a smooth, uniform consistency.

Application

Apply Color Concentrate With Sand coating mix with a soft rubber squeegee. Allow two to four hours drying time between coats.

Important

Temperatures must be above 50 ºF both during application and for a period of at least 24 hours after application.

Drying Time

Allow each coat of material to dry thoroughly before applying successive coats.

Clean Up

Wash tools in water before material dries.

Catalog Unit Size Unit Weight
View in Catalog 5 gal.Pail 66 lbs.
30 gal.Pail 390 lbs.
55 gal. Pail 660 lbs.