|
Description
TrackMaster Plus is a colorized acrylic emulsion manufactured with graded rubber particles designed to impart exceptional flexibility and durability to asphalt running tracks, and other sport surfaces.
Uses
TrackMaster Plus is designed for beautifying and protecting asphalt bound running tracks and field event surfaces. TrackMaster Plus protects against oxidation and moisture penetration of asphalt surfaces. TrackMaster Plus also reduces maintenance costs and prolongs the life expectancy of line striping.
Surface Preparation
Pavement surface must be cleaned entirely of dust, dirt, debris and all loose materials and vegetation. New asphalt must cure 14 to 30 days before application. Old, oxidized asphalt surfaces may require a coat of Acrylic Adhesion Promotor (see Technical Bulletin CMT-21). Depressions and shallow, damaged areas in the asphalt surface can be corrected by patching with Lane One (see Technical Bulletin CMT-16).
Mixing Procedures
Dilute TrackMaster Plus with water using the following ratio: 4 parts TrackMaster Plus to 1 part water.
Application
As a coating, TrackMaster Plus is applied using a soft rubber squeegee. A minimum of two coats are recommended. Allow the coated surface to cure for 24 hours before opening up for use.
Important
Stir before using. Temperatures must be above 50°F. both during application and for a period of at least 24 hours after application. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use.
Drying Time
Forty-five to ninety (45 to 90) minutes under optimum conditions..
Clean Up
Wash tools in water before material dries. |
