|
Description
SkateMaster is a 100% acrylic emulsion coating designed for color coating in-line skating pavement surfaces. The SkateMaster system consists of one or two coats of Acrylic Resurfacer and two coats of SkateMaster.
Uses
• Running Tracks
• Multi Purpose
Surface Preparation
Pavement surface must be cleaned entirely of dust, dirt, and debris. Repair of pavement surface defects, depressions, and cracks must be completed prior to application. All repairs must be flush and smooth to adjoining surfaces. New asphalt surfaces must cure 30 days prior to application. One or two coats of Acrylic Resurfacer shall be applied as required by surface roughness and porosity to provide a smooth, dense underlayment for application of color coatings. New concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. Acid etch concrete surface and apply SealMaster Concrete Sealer.
Mixing Procedures
SkateMaster is ready to use. Do not dilute.
Application
Apply SkateMaster with a soft rubber squeegee applicator.
Important
Temperatures must be above 50ºF both during application and for a period of at least 24 hours after application.
Drying Time
Allow each coat of material to dry thoroughly before applying successive coats. Allow coating to dry for 48 hours prior to skating.
Clean Up
Wash tools in water before material dries. |
