|
Description
Neutral Concentrate with sand is a 100% acrylic emulsion coating formulated for tennis courts and other sport and recreational pavement surfaces. Neutral Concentrate with sand is designed to be mixed with SportMaster ColorPlus pigment dispersion to achieve desired color.
Uses
Tennis courts, basketball courts, and other multipurpose
pavement surfaces.s
Surface Preparation
Pavement surface must be cleaned entirely of dust, dirt, and debris. Repair of pavement surface defects, depressions and cracks must be completed prior to application. All repairs must be flush and smooth to adjoining surfaces.
New asphalt surfaces must cure 14 to 30 days prior to application. It is recommended that any uncoated asphalt surface receive one or more coats of Acrylic Resurfacer
(Technical Bulletin CMT - 3) as required by surface roughness and porosity to provide a smooth, dense underlayment for application of color coatings.
New concrete surfaces must cure 28 days prior to application.
Concrete surfaces should have a medium broom finish or similar roughened texture. Etch surface with muriatic or phosphoric acid and apply SportMaster Acrylic Adhesion Promoter (Technical Bulletin CMT - 21).
Mixing Procedures
Mix in the following order for 55 gallon drum of Neutral Concentrate with Sand:
SportMaster Neutral Concentrate with Sand - 55 gallons
SportMaster ColorPlus - 4 gallons
Water - 20-25 gallons
Mix in the following order for 30 gallon keg of Neutral Concentrate with Sand:
SportMaster Neutral Concentrate with Sand - 30 gallons
SportMaster ColorPlus - 2 gallons
Water - 12-15 gallons
Note: Mix thoroughly to ensure complete dispersion of ColorPlus.
Application
Apply mixed coating with a soft rubber squeegee. A minimum of two coats are recommended.
Important
Stir material thoroughly before using. Temperature must be a
minimum of 50° F. and rising before application. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.
Drying Time
Neutral Concentrate with Sand dries in 30 to 60 minutes under optimum drying conditions. Allow each coat of material to dry thoroughly before applying successive coats. Low ambient or low surface temperature and high humidity increase drying time. Allow coating to cure for 48 hours before opening up for play.
Clean Up
Wash tools in water before material dries. |
