|
Description
Color Concentrate With Sand is a 100% acrylic emulsion coating designed for tennis courts and other sport and recreational pavement surfaces.
Uses
• Tennis Courts
• Multi Purpose/Basketball
Surface Preparation
Pavement surface must be cleaned entirely of dust, dirt, debris and all loose materials. Repair of pavement surface defects, depressions and cracks must be completed prior to application. All repairs must be flush and smooth to adjoining surfaces.
New asphalt surfaces must cure 14 to 28 days prior to application. It is recommended that any uncoated asphalt surface receive one or more coats of Acrylic Resurfacer (Technical Bulletin CMT- 3) as required by surface roughness and porosity to provide a smooth, dense underlayment for application of color texture and finish coats.
New concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a medium broom finish or similar roughened texture. They must never be steel trowelled. Etch surface with Muriatic or Phosphoric Acid and apply SportMaster Acrylic SportMaster Adhesion Promoter prior to color coating.
Mixing Procedures
The following mix design is for a 55 gallon drum of Color Concentrate with Sand:
SportMaster Color Concentrate with Sand - 55 Gallons
Water - 20-25 Gallons
The following mix design is for a 30 gallon keg of Color Concentrate with Sand:
SportMaster Color Concentrate
with Sand - 30 Gallons
Water - 12-15 Gallons
Note: Mix material to a smooth, uniform consistency.
Application
Apply Color Concentrate With Sand coating mix with a soft rubber squeegee. Allow two to four hours drying time between coats.
Important
Temperatures must be above 50 ºF both during application and for a period of at least 24 hours after application.
Drying Time
Allow each coat of material to dry thoroughly before applying successive coats.
Clean Up
Wash tools in water before material dries. |
