|
Description
Acrylic Adhesion Promoter is a clear drying, one part water based acrylic emulsion. It is designed to prime asphalt and concrete pavement surfaces and promote the adhesion of SportMaster Acrylic Color Coating Products.
Uses
• Tennis Courts
• Multi Purpose/Basketball
Surface Preparation
Asphalt
Pavement surface must be cleaned entirely of dust, dirt,
debris and all loose materials. Repair of pavement surface defects, depressions and cracks should be complete prior to application.
Concrete
New concrete surfaces must cure 28 days prior to application. Concrete surfaces should have a fine broom finish or similar roughened texture. Etch surface with phosphoric or muriatic acid and rinse thoroughly with water. Allow concrete to dry completely before applying Acrylic Adhesion Promoter.
Mixing Procedures
Stir thoroughly before using. Apply Acrylic Adhesion Promoter as is. DO NOT DILUTE.
Application
Use roller, spray, or broom to apply. Apply a thin coat of Acrylic Adhesion Promoter at the rate of 200 - 300 square feet per gallon. Do not leave excess build-up of material on surface. Allow Acrylic Adhesion Promoter to dry completely before applying SportMaster Coating Products.
Important
Stir before using. Temperature must be above 50ºF both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast. Keep from freezing. Close container when not in use.
Drying Time
Forty-Five to Ninety (45 -90) minutes under optimum conditions.
Clean Up
Wash tools in water before material dries. |
